EMIS

Audio and MIDI Interfaces & accessories

This page was last updated 16/03/2010

EMIS
HOME
Books & Music
Cables
Audio & MIDI Interfaces
Doepfer
Drums & Percussion
Drum Machines
Effects
Flightcases & Bags
Guitars
Headphones
Microphones
MIDI Files
Mixers
Mulitrack Recorders
Orchestral Instruments
Organs (Home & Stage)
Pianos (Home & Stage)
Portable Keyboards
Power Amps
Sequencers
Software
Speakers & Guitar Amps
Synth Expanders
Synth Keyboards
Misc (Everything Else)
STEINBERG
Steinberg MR816CSX MR816CSX

Functioning far beyond the envelope of traditional audio devices, MR816 CSX fuses a fully-featured FireWire interface and inbuilt DSP FX power with next-generation integrative technologies into one breathtakingly powerful production environment. Developed by Steinberg and Yamaha, this Advanced Integration DSP Studio is the hardware centerpiece of a latency-free recording and monitoring environment that fully exploits the flexibility and power of Steinberg’s renowned Cubase Music Production System.
True Integrated Monitoring™ with full faderless mixing: no latency, DSP-powered reverb and dynamic 1:1 hardware/software mirroring with Cubase
Complete Cubase user interface integration throughout: direct access from Cubase with no additional software mixing application or external windows required
Eight discrete Class A analogue ‘D-Pre’ mic preamps with combination XLR and TRS analogue inputs with advanced new inverted Darlington circuits, hardware gain knob, phantom power and -26dB Pad switch per channel
Quick Connect: next-generation of plug and play as well as on-the-fly routing of inputs to Cubase channels from the hardware with the push of a button
DSP Power for Cubase: VST3 onboard DSP-powered FX with eight Sweet Spot Morphing Channel Strips with compressor and EQ and one REV-X reverb: also available within Cubase during mixing
Instant setup: Cubase automatically detects the MR hardware and comes with ready made templates as well as automatic project I/O configuration
Full, flexible connectivity: eight analogue, one ADAT®, one S/PDIF and Coaxial I/O and WordClock sync
Extendable system with daisy-chaining of up to three units providing up to 24 analogue inputs and outputs
Includes Cubase AI4: hassle-free recording and creating music right out of the box thanks to the fully featured starter version of the world’s most popular music production software platform
Supports Apple OS X 10.4/10.5 and Windows XP/Vista : includes ASIO and CoreAudio drivers as well as additional external software mixer and plug-in editors for using with 3rd party audio software
£799
Steinberg CC121 CC121

Engineered specifically for the thousands of production environments using Cubase worldwide, CC121 interfaces the creativity of musicians and producers with the functional complexity of the world’s most popular music production system. Built to an extremely high manufacturing and component standard, CC121 provides totally integrated tactile control of all parameters within Cubase, with a unique design architecture that keeps you 100% focused on your Cubase project.
Advanced Integration System - totally integrated tactile control of Steinberg’s Cubase range of production systems, maintains complete focus on your production within Cubase
Ultra-precision Advanced Integration Controller Knob with ‘point and control’ support - controls any visual Cubase 4 parameter, internal FX setting or VSTi parameter using mouse pointer selection
High Quality, 100mm touch sensitive motorized fader: Full tactile control of the channel or group volume fader
Dedicated controls for Cubase channel settings including solo, mute, record arm, automation (read/write), pan, VSTi editor and ‘e’ settings button
Full Cubase EQ section in hardware: 12 Rotary EQ encoders and bypass/mode button
Full transport section including jog wheel
User-assignable section – adapt the CC121 to your needs
Instant plug and play with Cubase-ready LED - no additional setup or parameter assigning required
Outstanding engineering and component quality including valuable full metal case
Cross-platform support – compatible with Mac and PC
£299
ART
ART USB Dual  Pre USB Dual Pre

The ART USB Dual Pre is a full-featured high quality dual portable preamplifier and computer interface packed into a compact rugged case. It is designed to work over a wide variety of applications from remote field recording to desktop/studio tracking. Each of the two low noise input channels has up to 48 dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or 1/4-inch TRS. Each of the 1/4-inch TRS outputs is buffered low impedance balanced. It can be externally powered from the mains via a supplied 12 Volt DC adapter, or from an internal 9 Volt battery, or from the USB bus itself, or any combination of these power sources. When running off of the battery alone, you should get in excess of 50 hours of operation when phantom power is off. Battery life drops to around 20 hours (depending on microphone) when phantom powering from the battery alone.
£89
BCK
MIDI to Joystick Joystick 1

Joystick to MIDI Interface. 1.2m cable
£10
MIDI to Joystick Joystick 2

Joystick to MIDI Interface. 3m cable
£15
DOEPFER
MCV4 front

MCV4 rear
MCV4

The MCV4 is a MIDI-to-CV/GATE-Interface. CV1 (1v/octave) is generated from key data, CV2 is generated from Aftertouch data, CV3 is generated from either Velocity or Controller 7 (Volume) data and CV4 is generated from any MIDI controller number or Velocity. Gate/Trigger can be V-Trig or S-Trig. The MIDI Velocity data can multiply the data produced by the controller data.

Supplied with a power supply
£109
MSY2 Front

MSY2 Rear
MSY2

The MSY2 is a MIDI to clock interface that converts MIDI realtime events CLOCK, START and STOP into the corresponding signals CLOCK and START/STOP of the SYNC standard (as used by vintage drum computers or sequencers such as the Roland TR808 and TB303). SYNC-START/STOP is a signal that indicates on the 2 possible states: START = +5V, STOP = 0V. The MSY2 allows the reduction of the tempo by dividing the incoming MIDI clock frequency by any value between 1 and 16 with 4 DIP switches. 1 corresponds to the 1:1 conversion, 16 is the maximum of frequency reduction, i.e. after 16 MIDI clocks 1 SYNC clock appears. The polarity of the CLOCK signal and the polarity of the START/STOP can be chosen by 2 DIP switches.

Optional power supply £7
£79
EDIROL (Audio Interfaces)
UA20 UA20

USB Audio / MIDI interface
2 inputs/2 outputs
Digital optical output
MIDI input/output
£99
M-AUDIO
dMan PCI Dman PCI

16 bit/48KHz with 2 input/2 outputs/MIDI/onboard GM sound set. PCI card.
(NOT Windows XP or Vista)
£49
Dman2044 Dman 2044

20 bit/48KHz with 4 inputs/4 outputs. PCI card.
(NOT Windows XP or Vista)
£99
Delta410 Delta 410

24-bit/96KHz with 2 inputs/8 outputs/S-Pdif digital I/O. PCI card
£165
Quattro Quattro

24-bit/96KHz with 4 inputs and 4 outputs/MIDI. USB external box
£149
MIDIMAN
Winman 2x2 Winman 2x2

2 in /2 out ISA card slot MIDI interface for PC.
(Windows 98/ME)
(Not Windows Vista/XP/NT/2000)
£10
Portman 2x4 Portman 2x4

2 in / 4 out Parallel (Printer) Midi interface, designed for a Laptop PC or desktop PC without USB or Pre Windows 98 system.
(Windows 98/ME)
(Not Windows Vista/XP/NT/2000)
£15
Winman 4x4s Winman 4x4s

4 in /4 out ISA card slot MIDI interface for PC with SMPTE.
(Windows 98/ME/NT)
(Not Windows Vista/XP/2000)
£20


bar


For any queries or problems accessing this site please email and let us know.


Optimized for Internet Explorer 4

Optimised for Explorer 8
Designed with HotMetalPro (C) EMIS

(C) 2000-2010 EMIS. No part of this web site may be copied, and all text is copyright. All trademarks recognized and belong to their respective owners. The EMIS logo is copyright and owned by EMIS, Bristol, UK.